Photo: deco & style
Christmas on the table
Pimp your Christmas table decoration with these simple DIY ideas, because place cards and napkin ideas enhance every blackboard.
That's what you need for this napkin idea:
- napkin
- roped
- small branch
- boxwood
- ilex
- spigot
- scissors
And that's how easy it is:
1. Grasp the napkin in the middle and bind about 1/3 of it together with a ribbon.
2. Include boxwood and ilex and place the pin on top.
You need this name tag:
- spigot
- Acrylic paint in Mint (craft shop)
- lilac-colored construction paper
- Buchstabenstempelset
- inkpad
- brush
- pencil
- scissors
And that's how easy it is:
1. Paint the exterior of the stud with acrylic paint. Let dry.
2. Draw and cut out an owl on construction paper.
3. Stamp with the name of the guest.
4. Put the owl on the spigot.
You need this for this plate decoration:
- larch branch
- white spray paint
- napkin
- silver napkin ring
- small vase
- Hellebore
- Sugar Loaf spruce
- secateurs
And that's how easy it is:
1. Cut small twigs off the larch branch, spray on white and leave to dry.
2. Place the napkin in the napkin ring and put the dried larch branch in it.
3. Place the napkin ring on the plate.
4. Fill small vase with water.
5. Cut the Christmas roses and sugarloaf spruce, remove leaves and green and place in water.
Prop: Table Runner: Tableware, Napkin: Tableware, Small Vase: O Living, Christmas Balls: Ikea
You need this for the name tag:
- Small paper box (craft shop, 1, 49 €)
- Spray paint in white (mtn-shop.de, 94R-9010 White, 3, 70 € per tin) Fir large about 6.5 cm high (model building needs)
- Fir small about 3.5 cm height (model building needs)
- Bench (garden furniture, 14813, Noch, Modellbaubedarf)
- Craft glue artificial snow (craft shop)
- paper
- scissors
And that's how easy it is:
1. Spray the lid of the box in a well-ventilated room or outside in white and allow to dry.
2. Fix fir trees and bank with craft glue on the lid.
3. Place a small gift in the box and close it with the lid.
4. Sprinkle artificial snow over firs and bank.
5. Print the names of the guests or write them on small paper flags and clamp them in the fir branches.
What you need for the napkin idea with star cord:
- Embossing pencil (craft shop)
- Embossing foil in copper (craft shop)
- Cord (craft shop)
- scissors
- Lochzange
And that's how easy it is:
1. Draw stars with the embossing pin on copper embossing foil and cut out.
2. Punch a hole in each star in the center with the punch.
3. Now thread the stars one after the other on the cord and fix each with a knot from both sides.
4. Decorate the starcord decoratively over the place setting.
Props: Plate: Iittala "Sarjaton"; € 16.90, Bowl: Iittala "Teema"; € 17.90, cutlery: palais13.de; Set of 5 parts 35 €, rest: own
That's what you need for this place setting:
- Flower wire in length of the plate circumference
- Chestnuts Alder cones, larch cones, acorns, tree bark, beechnuts etc.
- Teller / Gedeck
- medium-sized pine cone
- Acrylic paint in white (craft shop)
- Photo carton in purple (craft shop)
- Gel pen in white (stationery shop)
- possibly rosehip branch (Multiflora)
- page Cut
- sewing needle
- brush
- scissors
And that's how easy it is:
1. Cut the wire according to the diameter of the plate plus about 20 cm length addition.
2. If necessary, pierce the collected pieces of nature first with a needle and then thread them alternately onto the wire. Wrap the pins with the wire.
3. Twist both ends of the finished ring together. Wreath around the plate.
4. Dab a medium sized pine cone with white paint on the tips of each dandruff and let the paint dry.
5. Write the names of the guests on the purple photo card with the white gel pen, cut out and pin the label into the top of the spigots.
6. Place the pin on the center of the disc.
Tip: If you like, stick a small rose hip branch in the pine cone.
