New look
How to do it
material
- colored final paint
- Paint brush and roller
- Sanding block and paper
- pencil
- drill
- jigsaw
Instructions: Before you start, measure the height of the console table and correct if necessary - the upper edge of the sink should be about 85 cm in height.
Then place the basin in the middle of the console and mark the cutout.
Then drill a hole in the surface to be cut out, place a jigsaw in it and cut out the marked surface.
Smooth edges with sandpaper. Now check the position and position of the pipes and the siphon so that no subsequent improvements are necessary.
We have used a very shallow siphon that disappears well behind the large aperture. Once the structural details have been clarified, the furniture is painted. For this, the surface is sanded carefully and applied the precoat.
After the paint has dried through, an intermediate sanding is required before the colored paint, so that the two paint layers adhere well.
Finally, assemble all parts and connect the cables.